View the firmware version of
the phone
Dial using the keypad: * # 0000
# – the version number
displayed on the display.
V 5.16
22-06-99
NSM-1
V 5.16 – software version
22-06-99 – date
NSM-1 – The hardware (model)
View IMEI
Dial using the keypad: * # 06 # –
IMEI number is displayed on the
display.
SimClock
Allows you to check whether
your SIM-card mode StopClock.
When transferring the card to
this mode significantly reduces
power consumption and thus
increases the work of the
battery. Generally, all modern
SIM-cards support this mode.
*#7780# reset to factory
settings.
*#67705646# This will clear the
LCD display (operator logo).
*#0000# To view software
version.
*#2820# Blue tooth device
address.
*#746025625# Sim clock
allowed status.
*#62209526# – Display the MAC
address of the WLAN adapter.
This is available only in the
newer devices that support
WLAN
#pw+1234567890+1# Shows if
sim have restrictions.
*#92702689# – takes you to a
secret menu where you may
find some of the information
below:
1. Displays Serial Number.
2. Displays the Month and Year
of Manufacture
3. Displays (if there) the date
where the phone was purchased
(MMYY)
4. Displays the date of the last
repair – if found (0000)
5. Shows life timer of phone
(time passes since last start)
*#3370# – Enhanced Full Rate
Codec (EFR) activation. Increase
signal strength, better signal
reception. It also help if u want
to use GPRS and the service is
not responding or too slow.
Phone battery will drain faster
though.
*#3370* – (EFR) deactivation.
Phone will automatically restart.
Increase battery life by 30%
because phone receives less
signal from network.
*#4720# - Half Rate Code
activation.
*#4720* – Half Rate Code
deactivation. The phone will
automatically restart
If you forgot wallet code for
Nokia S60 phone, use this code
reset: *#7370925538#
Note, your data in the wallet will
be erased. Phone will ask you the
lock code. Default lock code is:
12345
Press *#3925538# to delete the
contents and code of wallet.
Unlock service provider: Insert
sim, turn phone on and press vol
up(arrow keys) for 3 seconds,
should say pin code. Press C,then
press * message should flash,
press * again and
04*pin*pin*pin#
*#7328748263373738# resets
security code.
Default security code is 12345
SIM Clock
Stop allowed
Warranty Codes
* # 92702689 # [* # war0anty
#]
Enter the menu of warranty
codes. In fact, you do not need,
but you can find them using the
arrows scroll menu.
Menu:
1. Shows the serial number of the
device.
2. Date and year of manufacture
(eg 0299).
3. Shows month and year of sale (if
installed). Here you can set the
date, but be careful – it can be
done only once in their life
phone
4. Date of last repair (if any)
5. Sends all the phone numbers,
pictures, and calls from one
phone to another (possibly in
order to restore). In models with
an infrared eye, this procedure
works, and through him
EFR CODEC (Enhanced Full Rate)
This function with its inclusion
on the idea, should significantly
improve the quality of speech,
but unfortunately, it must be
supported by your connection.
When the work is slightly
increased power in the phone
call (about 5%). How do I know,
none of the Russian cellular
operators do not support this
feature. Principle is based on a
different compression algorithm
for speech recognition (ACELP)
and has a wider bandwidth.
Dial * 3370 # to activate (the
phone should reboot) or # 3370
# to deactivate this function.
HR CODEC (Half Rate)
Substantially impairs the quality
of speech, but saves battery
somewhere at 30%. Again, must
be supported by a mobile
operator. American networks
that support this feature, I do
not know.
Dial * 4720 # to activate (the
phone should reboot)
or # 4720 # to deactivate this
function.
“The secret” button
“Power” (61hh, 7110)
If you briefly press the button of
your phone, you get to the
“quick change” profiles (custom
settings). Very handy feature,
which personally I often use. Her
“documented” in the model
7110.
“The Secret” 54 #
If you are using a SIM-card
memory for storing notebook,
then knowing the exact address
of the phone number in the
memory (number of cells in the
SIM-card) is the ability to quickly
extract the necessary number to
the clipboard dialing apparatus.
Simply dial the cell (eg, 6) and
press # (bars). The number
immediately appears on your
screen.
Error in the microcode (61hh)
This error does not lead to any
serious consequences, and with
normal use of the phone “on
purpose” will not happen ever.
Here is a sequence of actions in
which it manifests itself – the
phone just reloaded.
1. Log in Calendar (Menu-8)
2. Make a note or reminder
3. Enter some text in the editing
window
4. Press and hold the Clear button
until the text is empty, then click
Back.
5. You will return to main screen,
but will appear on the screen
space (which you certainly do
not see).
6. Enter any 4 digits (eg 1234).
7. Using the arrow keys, move the
cursor to the beginning of this
line with the numbers (click the
down arrow 2 times).
8. Now enter any additional 6
digits and press Send (green
tube).
9. Wait a few seconds. Phone
flashes illuminated keys and
display, and finally reboot.
Answers to some of the other
questions you can get by
reading Nokia61xx FAQ by 2Pac.
Network Monitor (61xx)
This – the hidden menu in your
Nokia phone. If you want to
activate this menu, you must use
a program that
pereprogramiruet some chips in
your phone.
For example monitor the
network in Nokia 6110:
Check the version of your
software. You can continue ONLY
if you have 4.33, 4.73 or 5.24!
2. Dismantle EEprom.
3. Choose the program EEProm
(ATMEL In 24C64).
4. Read data from EEProm and
save in the backup.
5. If you have v4.33, then 4.73,
or change address 03B8 from 00
to FF.
6. If you have a v5-24, then
changed 0378 to 00 in FF.
7. Write the new data in EEProm,
and knitted his back to the
portable phone.
8. Turn on your phone and you
will have a new menu 10.
Network Monitor gives you the
following information:
Number (number) Courier
(transportation)
The level of sex workers in dBM
The received signal quality C1
(the criterion of loss of track is
used to select the cells and re).
Range – 99 to 99
RLT (Break Radio
Communication)
The loss of time information on
network
TMSI (Temporary Mobile
Subscriber Identity)
Identification of Cells (cell ID, the
number (number) of the cell)
MCC (Mobile Country Code)
MNC (Mobile Network Code)
LAC (Location Area Code)
Ciphering (vklvykl)
Hopping (vklvykl)
DTX (vklvykl)
Your business card on the
display:
Edit menu (Menu 2-7-2-1) to
your provider for that –
something that you want (3
characters maximum)
Install the unit cost of the phone
(Menu 2-7-2-1) to 1
Sign in to limit the cost (Menu
2-7-1-1) like your phone number
Change a profile (3 -…- Menu 3)
to its name
How to get new tones calls:
Set SMSC (phone number)
358405202999
Send an SMS with the word:
TONES
Send it to number 99999
When you receive a reply (this
will improve in the language)
you will list of ringing tones.
By selecting one, send it to the
same number.
After a while you get the tone.
You can edit a melody, and then
bring it to your phone!
New ringtone received. If it
works, he should write to New
ringtone received.
Scan, enhance, or remove
restrictions on the map
Enter * pw +1234567890 +1 –
Provider-Lock status
Press (printing) * pw
+1234567890 +2 – Network-
Lock status
Press (printing) * pw
+1234567890 +3 – Provider
(???)- Lock status
Press (printing) * pw
+1234567890 +4 – SimCard-Lock
status
1234567890 (master code) – 10
nine-code zaviseschy by IMEI
Disclosure of the hidden menu
nokia 6110
There are two menus for nokia
6100 series, which is not allowed
in the normal mode, and only
appears when some accessories
fitted, namely hands-free kit or
car kit.
Please note: Follow the
instructions that follow you can
deny the guarantee, for which I
bear no responsibility.
If you look at the bottom start
your phone, you will see 7
contacts.
The inclusion of hands-free
menu
If you zakorotite 1 and 2, the
contact shall appear the word
‘Headset’. Now you can use the
menu 3-6.
Including road menu.
Zakorotite contacts 2 and 3 for a
few seconds and you should see
the word ‘Car’.
Now you can use the menu 3-7.
Removing Menu
The only way to remove the
menu is to choose, choose
restoration of factory settings.
When asked, enter your security
code (by default – 12345). Doing
so will rid of the menu, but also
received poudalyaet the melody.
A police radar gun. (NOKIA
5110/6110/6150/8850)
In order to detect police radar,
do the following steps:
” Options –
” Secret settings – ”
” Group –
Activate and enter the code
00000 then press DC
Now you have to display a new
ekonka this means is that if a
radius of 1 km. Radar will phone
you about this report pikanem
(as SMS)
This does not work in some
countries!
In some phones you may want
to remove SP-Lock, directly
through the phone menu!
1. Insert the card of another
operator.
2. Turn on your phone and hold
the button increases the volume
of more than 3 seconds. And
then release your telephone asks
PIN code?
3. Click the “C”
4. Then press the button as far
as times * and 04 * PIN * PIN *
PIN #
Phone write PIN-code
conversion.
0 comments:
Post a Comment